BUCHI Rotavapo R-220 SE - Manual (Page 42)

5 Putting into operation
42 R-220 SE Operation Manual, Version F
5 .5 Setting up the support rod(s)
a
b
c
d
a Install the retaining bracket at the housing. Fasten the Torx screw well handtight.
b Premount the headless screw with a few turns at the side thread of the bracket.
c Remove the blind plug from the blind hole at the foot of the Rotavapor. Insert the short rod from above
through the retaining bracket into the blind hole.
d Tighten the headless screw at the retaining bracket to safely fixate the rod. Now, the receiving flask
holder(s) can be installed.