BUCHI Rotavapo R-220 SE - Manual (Page 50)

5 Putting into operation
50 R-220 SE Operation Manual, Version F
a
b
c
d
e
a Start with the distribution piece and mount it at the gearbox.
b Proceed with the expansion vessel. Mind upright installation!
c • Use the u-shaped bridge tube to roughly align the first condenser to the expansion
vessel.
• Fix the u-tube at the expansion vessel and subsequently bring in the condenser.
• Fasten the condenser. Fix the tube to the condenser.
d • Use the y-shaped bridge tube to roughly align the outlet of the second condenser to the
first condenser from below.
• Fix the y-piece at the first condenser outlet.
• Subsequently bring in the second condenser, fasten it and fix the y-piece.
e Align the receiving flask to the y-piece and fasten the clamp.