BUCHI Rotavapo R-220 SE User Manual
Page 52
5 Putting into operation
52
R-220 SE Operation Manual, Version F
Preparational steps:
• Install the appropriate glassware configuration between the gearbox and the y-piece
• Install the support ring at the support rod on a low position
• Install the shut-off tap at the y-piece
Main installation:
Connect the ball joint of the y-piece to the glassware configuration outlet. Fixate the
joint with an EasyClamp (DN 25).
Place the receiving flask on the support ring .
➥ Keep the receiving flask upright with one hand.
➡ Adjust the support ring until the ball joint between the receiving flask and the
y-piece is seated without tension.
Fixate the support ring in this position. Shift the anti-slip o-ring to bring it into contact
with the retaining bracket.
➡ Fixate the joint towards the y-piece with an EasyClamp (DN 25).
Install the draining valve with an EasyClamp (DN 25).