BUCHI Rotavapo R-220 SE - Manual (Page 53)

5 Putting into operation
53 R-220 SE Operation Manual, Version F
Dual receiver
Outlet of glassware configuration
Aeration screw cap
EasyClamp (DN 25)
Receiving flask
Draining valve
Branching piece 1
Branching piece 2
Shut-off tap
Preparational steps:
• Install the appropriate glassware configuration between the gearbox and the ‘branching piece 1’
• Install the support ring at the support rod on a low position
• Install the shut-off taps at the branching pieces
Main installation:
Connect the ball joint of the y-piece to the glassware configuration outlet. Fixate the
joint with an EasyClamp (DN 25).