Clear a-net resources, Mute/unmute all channels, Password lock – Aviom 6416m/RCI/MCS User Manual
Page 112
101
A
dvAnced
F
unctions
front‑panel button other than a channel activation button after the Function
button will also cancel the Function request.
Clear A-Net Resources
This Function clears currently active audio channels, stereo links, and VDC
assignments on a module for the current network mode, Auto or Manual.
The module must be unlocked to use this feature. The network cannot be in
Managed Mode.
To clear A‑Net resources, press the
F
unCtion
button. The Function button and
Enter/Cancel LEDs will flash. Press the
ChannEl
1 a
CtivE
button; the channel
1 Active button, VDC port assignment list, and all currently active channels
flash. Press
E
ntEr
. The A‑Net resources are cleared.
To exit without clearing the current A‑Net resources in use, press the
C
anCEl
button.
Mute/Unmute all Channels
Functions 2 and 3 can be used to mute and unmute the 6416m audio
channels.
To mute all 16 channels of the 6416m, press the
F
unCtion
button. The
Function button and Enter/Cancel LEDs will flash. Press the
ChannEl
2 a
CtivE
button and then press
E
ntEr
. All channels are muted simultaneously.
To exit without muting the 6416m channels press the
C
anCEl
button.
Once the 6416m channels have been muted by using Function 2, use
Function 3 to unmute all channels.
To unmute all 16 channels of the 6416m, press the
F
unCtion
button. The
Function button and Enter/Cancel LEDs will flash. Press the
ChannEl
3 a
CtivE
button and then press
E
ntEr
. All channels are unmuted simultaneously.
Active channels will then be available to all output modules in the network
that are set to the same Slot range.
To exit without unmuting the 6416m channels press the
C
anCEl
button.
Password Lock
Every Pro64 network can be password protected. Each module in the network
stores a unique password which can be used to lock the network when that
module is set to be the network Control Master. A password consists of a
four‑number sequence based on the channel active buttons, for example
“2‑13‑7‑10.” The default password for all I/O modules is “1‑1‑1‑1.”
To lock the network, press the
F
unCtion
button on the Control Master