Conair SC-5 - Manual (Page 49)

Raise will increase the preset by 1. The key can be pressed
once for each 1 increment required or held down to scroll up.
Releasing the key will freeze the preset at the last value then
press enter.
Lower will decrease the preset by 1. The key can be pressed
once for each 1 decrement required or held down to scroll
down. Releasing the key will freeze the preset at the last value
then press enter.
Numeric keys
Key in the number of blades mounted and press enter. If the
value entered is out of range an error message with the valid
range will be displayed.
Enter or Delete?
If the keyed in number is correct press the enter key for it to
be accepted and return to the Blade Select or Main Mode
Screen. If it is wrong press the delete key and the previous
preset will reappear.
FUNCTION AREAS
Additional information on how to access and navigate these
screens can be found in the operator display overview section
of this manual.
Menu fixed function key is used to access the Function Areas
from any main mode screen. There are two Function Area
screens. The user can toggle between the two screens with the
Next and Prev fixed function keys.
C
ONTROL
I
NSTRUCTIONS
F
UNCTION
A
REAS
SELECT FUNCTION >
Blade Test Mode
< SELECT FUNCTION
Min Parts CPM
C
ONTROL
I
NSTRUCTIONS
B
LADE
C
OUNT
S
CREEN
CONTINUED
Continued
O PERATION
4-15 UGE059/1003 SC-5 SURE CUT Servo Knife Cutter