Conair SC-5 - Manual (Page 19)

UGE059/1003 SC-5 SURE CUT Servo Knife Cutter
D
ESCRIPTION
2-9
TIP: Conair strongly recom-
mends the use of an isolation
transformer. Ensuring clean
and proper power can help
avoid the need for costly ser-
vice calls.
Discharge Conveyor
A discharge conveyor facilitates the removal of cut parts.
Discharge conveyors are available in the following sizes:
● 6 inches wide by 6 feet long
● 6 inches wide by 10 feet long
● 6 inches wide by 16 feet long
Isolation Transformer
The isolation transformer protects sensitive electronics from
incoming power, which helps prevent errors caused by electri-
cal noise. It also protects equipment from electrical noise gen-
erated by the servo motor and associated amplifier.
NOTE: An isolation transformer will not compensate for a
ground that does not meet code requirements.
Left to Right Machine Operation
This option changes the machine direction from the standard
right to left extrusion flow.
Special Paint Type or Color
This option covers any change from the standard Conair
paint.
Your Conair sales representative can analyze your needs and
recommend the options that are right for your system.
O
PTIONAL
E
QUIPMENT