Conair SC-5 - Manual (Page 22)

The SC-5 Sure Cut Series Servo Knife Cutter comes fully
assembled in a single crate.
U
NPACKING THE
B
OXES
SC-5 SURE CUT Servo Knife Cutter UGE059/1003
3-2
I NSTALLATION
CAUTION: Lifting
To avoid personal injury or damage to the cut-
ter, lift the cutter using a forklift or hoist with
straps that have been positioned at the cutter's
center of gravity.
Carefully uncrate the cutter and its compo-
nents.
Remove all packing material , protective paper,
tape, and plastic. Compare contents to the shipping papers
to ensure that you have all the parts.
Carefully inspect all components to make sure
no damage occurred during shipping. Check all wire ter-
minal connections, bolts, and any other electrical connec-
tions, which may have come loose during shipping.
Record serial numbers and specifications in the
blanks provided on the back of the User Guide's title
page. This information will be helpful if you ever need
service or parts.
You are now ready to begin installation.
Complete the preparation steps in Preparing for
Installation, Section 3.
1
2
3
4
5