Panasonic SC-CH7 - Manual (Page 35)

Changing the Tone Quality
Carry out the steps 1, 2 and 3 ait "Standard Operation’' on
page 20.
1 Press the equalization function button to ON.
^ TSOUNDJOO /
/
EQ
»HEAVY CLEM
•OFT VOCAL
MMT CM ST
\
2 Press the equalization mode-select/recall but­
ton to select desired tone quality.
Each time you press this button, the equalization curve will
change as follows.
HEAVY-^CLEAR->SOrr-»VOCAL-»H.P.ST~»CAR ST
t____________________________________ I
■ When the equalizer effect is not necessary
Press the equalizatim function button.
( The preset equalization curves
1 HEAVY
This curve can be used to add
“punch” to rock and other
music.
2 CLEAR
This curve can be used to clarify
the treble range of jazz, etc.
3 SOR
This curve can be used to listen
to background music, etc. at a
low volume level.
4 VOCAL
“ - _ ____ ______
This curve can be used to clarify
vocal music.
_ - " _ - " - _
5 H.P.ST
This curve can be used to record
a tape for playbadt using the
stereo cassette player (Head­
phones Stereo).
" " _--------------- ---------
6 CAR ST
This curve can be used to record
atape for playback using the car
audio system (Car Stereo).
-35-