Spectrum display, To temporarily reduce the volume level – Panasonic SC-CH7 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

spectrum

mode

demo

Spectrum display

This shows the level of each sound range (frequency range).
The foHowtng 6 types of display modes are possible.

Each time the spectrum mode-setect demonstration button is

pressed, the display mode changes.

1. Peak-hold display

The peak sound value of each sound

range is held on the display for about

one second after it occurs.

2. Dot display

Only the upper two parts of the bar

display are shown, thus maidng the
strength of the sound for each sound

range even easier to see.

3. Hustler mode

The peak sound value of each sound

range is displayed in augmented

form.

4. Aurora mode

The peak sound value of each sound
range is displayed in inverted form.

5. Afterimage display

After indicating the peak sound value
of each sound range, it will fall down
giving an afterimage.

6. Repeat mode

Indicates each of 1 to 5 sequentially

for about five seconds at a time.

To temporarily reduce the volume level

MUTING

Press №e muting button on the remote control transmitter. The

volume level is attenuated by 20 dB (approx. 1/10).

If the audio output has been muted by the muting button on the

remote control transmitter (the muting indicator is tit), the muted
state can be cancelled by pressing the muting button once again or
by setting the volume level to the "— dB" position.