Panasonic SC-CH7 - Manual (Page 20)

standard Operations
For Australia:
Has the power switch on the rear pane) been
switched ON? (See page 7.)
1
2
3
4
Switch ON the power.
Select the desired audio source.
DAT; Press this button to listen to the playback sound
from the DAT,
TAPE: Press this button to listen to tapes.
CD; Press this button to listen to compact discs.
TUNER: Press this button to listen to radio broadcasts.
PHONO: Press this button to listen to phono discs.
If the tuner source is selected, the CD players power will be
cut off.
The CD or tape will automatically stop when a different input
mode is selected during its operation.
Start the sound source.
Adjust the voiume level.
After listening is finished
Be sure to reduce the volume level, and switch this unit to standby
mode using its "STANDBY(i)/ON" switch or an “ON/OFF” switch
on the remote-control transmitter.
Note:
The input selection and equalizer settings wilt be retained (as they
were at the time when the power is switched to standby mode) by
the memory back-up funchon.
To listen through headphones
PHONES
Connect headphones (not included) to the head­
phones Jack.
Notes:
•Reduce the volume level before connecting headphones.
•Sound from the speakers will not be heard when headphones are
connected to this jack.
•Avoid listening for a long time at a volume level so high that it
irritates the ears.
•Plug type: Stereo mini.
To use a microphone
Connect the microphone (not Included) to the
microphone Jack after reducing the volume level.
If strange noises (squealing or howling) are emitted during mixing
either change the direction of the microphone or turn down the
volume.
It is possible to record a singing voice accompanying the tuner or
CD.
•Plug type; Monaural mini.
-20-