Panasonic SC-CH7 - Manual (Page 18)

Front Panel Controls and Functions
(continued)
Cassette deck: control section
0 Deck1/deck2 selector (DECK 1/2)
This button is used to select the deck to be operated.
(2) Dolby noise reduction button (DOLBY NR)
This button is used to reduce the hissing noise heard from the
tape. This unit is prbvided with both the Dolby B-type and
Dolby C-type noise reduction systems.
@ Reverse mode button (REVERSE MODE)
This button is used to select the reverse mode (for playback or
recording).
® Tape counter reset button
(COUNTER RESET)
This button is used to reset the tape counter indicator to
“ 000 ”.
® Edit speed button (SPEED)
This button is used to select the recording speed when
edit-recording tapes.
(g) Synchro-start button (SYNCHRO START)
This button is used to start a tape-to-tape recording, simul­
taneously starting deck 1 (the playback deck) and the deck 2
(the recording deck).
0 Record/record standby button
(• REC PAUSE)
This buttcHi is used to put deck 2 into №e record standby
mode.
(g) Fast-forward/rewind/music select buttons
{ « (MS). (MS) ►►)
These buttons are used to advanced or rewind the tape, or to
quickly search for the beginning of a tune while the tape is
being played.
@ Playback buttons (O. >)
These buttons are used to start the playback or reconting
(Deck 2 only).
® Elect button (^ EJECT)
This button is us^ to open the cassette holder.
Q Stop button (□)
This button is used to stop the tape movement.
-18-