Panasonic Panafax UF-650 - Manual (Page 88)

Explanation of Contents
(1) Printout date: Day-Month-Year
(2) Printout time: Hour:Minute
(3) Printout page number
(4) Communication number; 001—120 (Does not always
begin with 001 when printed
out manually.)
(5) Communication result: “OK" indicates that the trans­
mission was successful.
“S-OK” indicates that STOP
was pressed during
communication.
Three-digit information code
(see page 5-1) appears when
there was a problem.
(6) Number of pages transmitted or received:
The first three-digit number
represents the number of
pages successfully transmitted
or received. The second three-
digit number represents the
number of pages that were
stored into memory or set by
Total Pages setting.
An asterisk indicates that
the quality of some transmitted
or received copies was poor.
(7) File number: 001 to 999
(These numbers are assigned
for each memory
(8) Duration of communication;
Hour:Minute’ Second
(9) Type of communication: “XMT" means Transmission
“RCV” means Reception
(10) Remote station identification;
Name : One-Touch No. and recorded name,
[nnn] Name ; ABBR. No. and recorded name
® Number : Dialed telephone Number
Number : Remote station’s ID Number
Name ; Remote station’s Character ID
Group 2, 3
: Remote station was a CCITT G2, G3
machine
(11) Communication date: Day-Month
(12) Communication start time;
Hour-.Minute
Diagnostic: For service personnel only
LOGO: Up to 25 characters
ID Number: Up to 20 digits
Character ID; Up to 16 characters