Panasonic Panafax UF-650 - Manual (Page 41)

3. BASIC OPERATION
3-1-4.
MEMORY
TRANSMISSION
The memory function allows you to easily perform many different tasks.
You can store your documents into memory to reserve a transmission
almost any time even when the machine is receiving or transmitting from
memory, and then have the machine transmit the stored documents
automatically after the completion of the current operation. You do not
have to wait around until transmission or reception is finished.
The advantages of memory transmission are:
1. The same document can also be transmitted to multiple stations.
2. If communications fail when transmitting from memory, your machine
will re-transmit the remaining unsuccessful page{s) automatically.
3. In addition to transmitting from memory, you can also reserve another
transmission into the memory.
NOTE
1. When you place the document on the ADF, if the machine is receiving or transmitting
from memory, the display will change to “DOCUMENT SET, ENTER STATION(S)" and
display the percentage of memory used. You are ready to now reserve the
transmission.
2. When you enter the stations, the total number of stations is shown at the upper right
corner of the display.
3. The Fite Number of the document being stored is shown at the upper right corner of
the display while storing takes place. It is also printed on the COMM. JOURNAL
(Communication Journal) and the File List. The percentage of memory used is shown
on the lower right corner of the display after each page is stored.
4. If a memory overflow condition occurs while storing documents into memory, the
machine wHI ask on the display, whether to start transmitting those pages which are
successfully stored or cancel, if you wish to cancel this transmission, press 1. If you
wish to transmit, press 2.
n
5. An information code and an error message will be displayed if the transmission has
failed or no answer at the receiving side after the last automatic redial. The document
stored for this transmission will be erased from the memory automatically and the
Communication Journal (COMM. JOURNAL) will be printed out stating the
transmission is INC” (incomplete), see page 3-5.
If you wish to save the incomplete communication memory files, change the Fax
parameter setting (No. 24), see page 2-77.
6. Even if a power failure occurs, your machine will retain the documenf information
stored in the memory up to 72 hours.
DOCUMENT SET
ENTER STATION(S) 00 %
ONE-TOUCH STNS=001
<01> (Station Name)
* STORE ^ N0.015
PAGES=002 05%
MEMORY OVERFLOW
INFO. CODE=870
060 PAGES COMPLETED
DELETE ? 1;YES 2:NO
INCOMPLETE
INFO. CODE=633