Panasonic Panafax UF-650 - Manual (Page 24)

2-2-3.
ONE-TOUCH/
ABBREVIATED
DIALLING NUMBERS
Entering One-Touch/
Abbreviated Dialling
Numbers
NOTE
1. If you require a special access
number to get an outside line, enter
it first and then press PAUSE. A
hyphen ” is displayed for pause.
2. Use SPACE to enter a space be­
tween the numbers to make it eas­
ier to read.
3. If you input a wrong number in Step
5. press CLEAR to erase the
number before the cursor, then re­
enter the correct number and press
SET.
4. If you want to go back and change
anything, e.g., the telephone num­
ber, press SET repeatedly to skip
through the preceding steps. You
do not need to reenter everything
again.
5. To print out a Qne-Touch/ABBR.
Dialling Number List, see page 4-40.
One-Touch Dialling and Abbreviated Dialling are two fast ways of dialling
full numbers. To use these dialling methods, you must first enter the full
numbers using the following procedure.
FUNCTION
^77
a n d
SET MODE (1-5)
1;USER PARAMETERS
SET MODE (1-5)
2:ONE-TOUCH/ABBR.NOS
ONE-TOUCH/ABBR.
To assign a One-Touch
number, press a One-Touch
key.
Ex: 01
To assign an Abbreviated
number, press
ABBR and
three-digit code on the keypad
to enter any code from 001 to
200
.
EX: ABBR06 2
Enter facsimile telephone
number (up to 36 digits)
including pauses and spaces.
Ex: 9 PAUSE 5 5 5 SPACE 1
234
To store the number,
SET
ONE-TOUCH<01> TEL.
■
ABBR[062] TEL.
■
0NE-TOUCH<01> TEL.
9-555 1234B
TT ONE-TOUCH<01> NAME
Enter receiving station's name
(up to 15 charaaers) using
One-Touch/Character k^
(see page 2-10).
Ex: PANASONIC
ONE-TOUCH<01> NAME
PANASONIC ■