Panasonic Panafax UF-650 - Manual (Page 28)

Fax Parameter Table
No. Parameter
Setting
Numb«’
Setting Comments
18 RCV TO MEMORY
*1 Invalid
Selecting whether or not the machine
always receives to memory.
Invalid; Receive to printer.
Man. print: Receive to memory. Prints out
when copy key is pressed.
Auto print: Initialy receives to memory
then prints out automatically.
2 Man. Print
3 Auto Print
19
AUTO JOURNAL
PRINT
1 Invalid Selecting whether or not the machine
prints the journal automatically after every
120 transactions. *2 Valid
20 CHARACTER ID
1 Invalid Selecting whether or not the machine
sends the Character ID to remote station.
*2 Valid
21
KEY/BUZZER
TONE
1 Off Selecting volume of the Key/Buzzer Tone,
*2 Soft
3 Loud
22 POLUNG PASSWORD — — Common Polling Password
23
POLLED FILE
SAVE
*1 Invalid Selecting whether or not the machine can
be polled for the same files repeatedly.
2 Valid
24 INC. FILE SAVE
*1 Invalid Selecting whether or not the machine
saves the incomplete communication
memory files. 2 Valid
25
ONE-TOUCH
GROUP KEY
*1 Invalid Selecting whether or not the one-touch
keys are used for Group Keys.
2 Valid
26
RELAY XMT
REQUEST
*1 Invalid Selecting whether or not the machine per-
forms Relay XMT Request.
2 Valid
27
CONFIDENTIAL
COMM.
*1 Invalid Selecting whether or not the machine per-
forms Confidential Communication.
2 Valid
28
CONF, POLLED
FILE SAVE
*1 Invalid Selecting whether or not the machine can
be polled for the same conf. files
repeatedly. 2 Valid
29 XMT-PASSWORD — — XMT-Password
30
CHECK XMT-PW
ATTX
*1 Off Selecting whether or not the machine
checks the XMT-Password of receiving
station when transmitting. 2 On
31 RCV-PASSWORD — — RCV-Password
32
CHECK RCV-PW
ATRX
*1 Off Selecting whether or not the machine
checks the RCV-Password of transmitting
station at receiving. 2 On
33 FAX ACCESS CODE — — Fax Access Code
34 DEPARTMENT CODES
*1 Invalid Selecting whether or not the machine can
enter the Department Codes.
2
Valid
NOTE
1. Depending on the PBX conditions
at the moment the fax machine is
called, the number of rings can
differ from the setting number.
2. mark indicates that the factory
setting.
3. Standard settings are printed on the
Fax Parameter List. To print out Fax
Parameter List, see page 4-45.