How to poll, How to poll -3 – Panasonic Panafax UF-650 User Manual

Page 54

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How to Poll

NOTE

1 To erase or change the stations

setting in Step 5, press CLEAR. If
you recorded several, use A or T to

find the station you want clear.

Then press CLEAR. Add new sta

tions using Step 5 procedure.

2. If a polled station is busy, or does

not answer, it will be skipped and
the next station will be polled. The
skipped stations(s) will be redialled

up to five times after ail registered
stations have been polled.

3. You can verify that polling commu

nication was successful or not by a
communication Journal (see page
3-5).

The following procedure lets you poll one station, or multiple stations in

one operation.

FUNCTION

POLLING

(1-4)

1 :POLLING

POLLONG

PASSWORD=1234

Common Polling Password

Enter four-digit New
Password If necessary.

Ex: 5678

If you just press SET in Step 3,

the Polling Pasword will be
applied to a Common

Password.

POLLING

PASSWORD = 5678

Individual Polling Password

POLLING

ENTER STATION(S)

Enter station(s) by using;

• OneTouch Keys (Up to 28

stations)

• ABBR

and three-digit (Up

to 200 stations)

• Direct Dialing by pressing

SET

key (Up to 50 stations)

Ex:

One-Touch Key

ABBR

and

003

7772345

and

SET

<^ START

ONE-TOUCH

STNS=001

<01> (Station

name)

ABBR.

STNS=002

[003] (Station name)

TEL.NO.

STNS=003

7772345

* STORE *

N0.005

* DIALLING *

[003] (Station name)