Resolution, Halftone, Verification stamp – Panasonic Panafax UF-650 User Manual
Page 35: Resolution -4, Halftone -4, Verification stamp -4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. BASIC OPERATION
Resolution
Halftone
Verification Stamp
NOTE
1. If you transmit the documents from
memory (Memory Transmission), the
verification stamp will not stamp.
If you wish the stamp to operate
when using memory transmission,
change the Fax parameter setting
(No. 11). See page 2-17.
Your machine is preset to Standard resolution, which is suitable for
ordinary documents. Use FINE or Super-FINE for very detailed docu
ments.
FINE
SUPER-FINE
RESCH.UTION = FINE resolution.
If satisfied, go to Step 3.
FINE
SUPER-FINE
RESOLUTION
= SUPER-FINE resolution.
You can now dial by pressing
TEl/DIAL
and a full
number, a One-Touch key,
ABBR
and three-digit
code or
REDIAL..
The Halftone setting is useful when sending photographs or illustrations
with gray tones.
-'">iALF TONE
T
The LED is lit when HALF TONE is ON.
You can now dial by pressing TEVDIAL and a full number, a
One-Touch key,
ABBR
and three-digit code or
REDIAL
The verification stamp helps you to confirm successful transmissions by
stamping the bottom of each successfully transmitted page with a small
0 mark, (see Note)
'STAMP
T
The LED is lit when STAMP is ON.
You can now dial by pressing
TEl/DIAL
arxJ a full number, a
One^Touch key,
ABBR
and three-digit code or
REDIAL