Panasonic Panafax UF-650 - Manual (Page 100)

5
-
1
.
PROBLEM
SOLVING
If You Have Any of These
Problems
1
.
2 .
3.
During Transmission
a) No dial tone see page 5-10
b) Document feeding trouble
i) Loading document(s)
see page 3-1
ii) Document misfeeding see page 5-8
c) Document jam see page 5-5
d) XMT copy quality is abnormal
i) All black copy
see page 5-6
ii) Copy with black line(s) see page 5-6
iii) All blank copy see Note 1
e) Communication trouble see Note 2
f) Verification stamp trouble
i) 0 mark is too light see page 5-9
During Receiving
a)
No Automatic receive
i) “MANUAL RCV” on display
see page 3-16
ii) Telephone not ringing see page 5-10
b) No recording paper see page 2-5
c) Recording paper jam see page 5-4
d) RCV copy quality is abnormal
i) Black or black streaks
see Note 3
ii) Blank or blank streaks see page 5-7
e) Communication trouble see Note 2
No unit operation
a) No power see page 2-8
b) “ADF/RCV COVER OPEN” is displayed see page 5-2
(Code 060 or 061)
Information Codes
When something unusual occurs, the display may show one of the
information codes below. These will help you fix the problem.
NOTE
1. Make sure the document is set face
down. If it is correct, report to serv­
ice personnel.
2. Check with the other party or try
again.
3. Check own copy quality, if it is ab­
normal, report to service personnel
If it is normal, report to other party.
Information
code
Meaning Action
001
002
Recording paper jam. Remove jammed paper.
(See page 5-4)
004 Recording paper jam. Remove jammed paper and
reset cutter position.
(See page 5-4)
010 No recording paper or recording
paper not set properly. Reload recording paper.
(See page 2-5)
020 Thermal Recording Head
temperature is too high. Open the receiving unit for a few
minutes to permit cooling.
030 Document misfeeding. 1. Reload the document
properly. (See page 3-1)
2. Remove document jam.
(See page 5-5)
3. Adjust ADF
(See page 5-5)