Panasonic NV-VS3A - Manual (Page 74)

position during recording or playback so that you can easily
find it again iater for playback.
1
Reset the Tape Counter to zero at the tape
position from which you want to play back
later. (-» 72)
2
Set [DISPLAY] on the [OTHER FUNCTIONS]
Sub-Menu of the [CAMERA FUNCTIONS] O or
the [VCR FUNCTIONS] Main-Menu O to
[MEMORY].
3
Start playback or recording.
4
After playback or recording is finished:
Set the [CAMERA/OFF/VCR] Switch to [VCR].
5
Press the [►►] or [◄◄] Button.
The tape automatically stops approximately at the
position at which you reset the counter to zero.
•During High-Speed Rewinding, the Tape Counter shows
[0:00.00]. However, this does not activate the Memory Stop
Function.
74