Panasonic NV-VS3A - Manual (Page 72)

e
laWMMilEE
R £ C S P E E D ► S P
T A P E S D ► 3 0
S E L F S H O O T ► N O R .
S - V H S E T ► O F F
V O I C E 2 0 0 M ► O F F
D I S P L A Y ► A L L
___
D E M O M O D E ► O F F
R E T U R N ► - - - -
Using the Tape Counter Indication
The Tape Counter Indication is convenient for the following
2 purposes: to check the Elapsed Tape Time (described
below), and to use the Memory Stop Function (-♦ 74).
Checking the Elapsed Tape Time
The Tape Counter Indication shows the elapsed tape time
both during recording or playback.
You can freely reset this indication (return the counter to
[0:00.00] O). Therefore, by resetting the counter to zero when
you start recording or playback, you can check the tape time
that has elapsed from that point.
After displaying the [OTHER FUNCTIONS] Sub-Menu...
(->16)
1
Turn the [▲ T] Dial to select [DISPLAY].
2
Press the [SET] Button to select [ALL],
3
Turn the [A T] Dial to select [C.RESET],
4
Press the [SET] Button to select [YES].
•When recording or playback starts, the elapsed tape
time is indicated in hours, minutes and seconds. During
playback of parts of the tape on which no recording has
been made, this indication does not change.
•If you rewind the tape further than the tape counter
position [0:00.00], the minus sign [-] appears in front of
the Tape Counter Indication.
•The Tape Counter indication is automatically reset to
[0:00.00] when you take out the cassette, remove the
Battery or use the High-Speed Rewinding Function.
e Camera Mode
©; VCR Mode
72