Panasonic NV-VS3A User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Tally Lamp Q

If you don’t want the Tally Lamp to light during recording, set
[TALLY LAMP] on the [CAMERA SETUP] Sub-Menu to [OFF].

'During recording, it is not possible to change the recording

mode ([MNL], [ ^ ]. [fc], [¿], [0], [g^']), even if you
press the [PROG. AE] Button. 59)

'If you leave the Movie Camera in the Recording Pause

Mode for more than

minutes, it automaticaily switches

off to protect the tape and to conserve battery power. To
resume recording from this condition, set the [CAMERA/
OFF/VCR] Switch to [OFF] and then to [CAMERA] again.