Panasonic NV-VS3A - Manual (Page 36)

Playback
Watching Playback on the Movie Camera
You can watch playback of the recorded scenes.
1
Set the [CAMERA/OFF/VCR] Switch to [VCR].
•Turn the switch while pressing the button O-
•The [VCR] Lamp 0 lights.
2
Press the Button.
•The tape starts to rewind. When the tape reaches the
beginning, the rewinding automatically stops.
3
Press the
[►]
Button.
• Playback starts and the [l>] Indication Q appears.
When the tape reaches the end, it automatically
rewinds to the beginning.
■ Stopping Playback
4
Press the
[■]
Button.
• Playback stops and the Movie Camera changes over to
the Stop Mode.
5
Take out the cassette. (-^ 22)
6
Set the [CAMERA/OFF/VCR] Switch to [OFF].
7
Disconnect the AC Adaptor or remove the
Battery.
■ Adjusting the Sound Volume
Push the [-VOL+] Lever Q toward [+] to increase the
volume or push it toward [-] to decrease the volume.
The [VOLUME] indication appears and the number of bars
increases or decreases. When you release the Lever, this
indication disappears.
You can also adjust the volume with the Remote Controller.
Increase the volume by pressing the [T] Button, or decrease it
by pressing the [W] Button.
This adjustment is only possible during playback.
• Do not cover the Speaker 0 during playback.
•Because the speaker contains a magnet, do not bring a
cassette near the speaker. It could adversely influence the
recorded content.
36