Panasonic NV-VS3A - Manual (Page 33)

I.. I!;
K '^J
0
Checking the End of a Recorded
Scene
(Recording Check Function)
By automatically playing back the final 2 seconds
{approximate) of the last recorded scene, this function lets you
check if a just finished scene has been recorded correctly.
When you then start recording the next scene, it is
automaticaliy joined with a smooth transition free from picture
distortion. For especially important scenes, use this function
from time to time for confirmation.
1
Press the [[^] Button briefly in the Recording
Pause Mode.
•The [CHK] Indication O appears and the final
approximately 2 seconds of the last recorded scene are
played back.
After that, the Movie Camera returns to the Recording
Pause Mode and is ready for recording the next scene.
([CHK] means Check.)
Searching for a Tape Position Before the End
of the Last Recording
(Camera Search Function)
This function makes it easy to search for a point in a
previously recorded scene or cassette from which you want to
start recording a new scene. In addition, it ensures smooth
scene-to-scene transitions free from picture distortion.
2
Keep the [-SEARCH] Button (or the
[SEARCH+] Button) pressed in the Recording
Pause Mode.
Reverse Search
0 Forward Search
33