Panasonic 2-LINE PLAIN PAPER FAX KX-FPW111 - Manual (Page 85)

Receiving Faxes
Extension telephone
You can connect an extension telephone to the EXT.L1 ONLY jack. When receiving a fax call using the
extension telephone, you can activate the fax machine remotely using the extension telephone and receive
fax documents. You do not have to press [START/SET/COPYl on the fax machine.
Important;
• Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
•You cannot answer a call coming from line 2 using the extension telephone.
1
2
When the extension telephone rings, lift the handset
of the extension telephone.
When:
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
press [*I9] (pre-selected fax activation code) firmly.
Hang up the handset.
•The unit will start reception.
To the EXT.L1 ONLY
jack or the same line
Extension telephone
Note:
•You can change the fax activation code
(see below).
Fax activation code
The fax activation code is required in the following cases;
—to receive faxes using an extension telephone (see above).
—to receive a voice message and fax document In the same call (p. 84).
Important:
•This code should be different from the remote activation ID (p. 84).
1
2
3
4
5
6
7
Press [MENU],
Display:
Press ® S-
1.SYSTEM SET UP
8 Press (MENU).
FAX ACTIVATION
®/® [MENU]
Press [START/SET/COPYl
MODE=ON ▼A
Press [ t ) or [ a ] to select “ON”.
• If this feature is not required, select “OFF”.
Press [START/SET/COPYl
CD CD®
®®®
O —cr
/o\
CODE=*9
•The display will show the pre-selected code.
Enter the new code.
•This code can be from 2 to 4 digits in length
using 0 - 9 , and
Press [START/SET/COPYl
® ® ® o d
SETUP ITEM t ]
iSTART/SET/COPY]
Note:
• If you subscribe to any special telephone
company services which require a code,
all or part of the fax activation code must
be different from the service access code.
•The fax activation code should not be set
to “0000”.
I “
?!
! 9
■o
1 *<
I____
85