Installation, Installing the battery – Panasonic KX TGA420B User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
Installing the Battery
If you want to use the station unit in a remote location from the power
outlet, a rechargeable Nickel-Metal Hydride (Ni-MH) battery will power the
unit (Battery power mode). The battery will also work as emergency power
during a power failure.
The battery is charged in the battery compartment while the AC adaptor is
connected (p. 9). It takes about 8 hours to charge fully. For details about
battery charge and battery information, see pages 10 and 11.
1
Install the battery in the
battery compartment.
Be sure wires are free from
being pressed by the battery
body or battery cover.
2
Close the battery cover: Slide the battery cover, and push it forward as
shown until it locks into place.
8
'
Use only a Panasonic Handset for the KX-TGA420B.