Panasonic KX TGA420B - Manual (Page 35)

Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press [TONE I before entering access numbers which require tone dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the mode
will return to pulse. ______
• Access numbers entered after pressing [TONE] will not be included when
redialing.
Other Programmable Settings
Selecting the Ringer Pattern
You can select the desired ringer patterns. 4 patterns are available for
each line. Your phone comes from the factory set to pattern 1.
Make sure that the station unit is in the standby mode.
y Press I
function !.
2 Press V Of -A until the arrow points to
“Ringer setting”,
and press ►.
3 Press V or A until the arrow points to
“Ringer pattern",
and press ►.
• The current settings are displayed.
If registered to KX-TG2000B, “L3” and “L4” are
inoperative.
4 Enter the desired pattern using the dialing
buttons {(T] to (D) for each line. To move to
another line, press ► or ◄.
• If registered to KX-TG2000B, do not select “L3” and
• Each time you select a pattern, it rings.
5 Press I ENTER I.
• A beep sounds.
• To return to the standby mode, press [EXIT],
Save directory
►Ringer setting
Line selection
Ringer volume
►Ringer pattern
Incoming call
Ringer pattern
L2 L3 L4
‘L4”.
a
S
:3
o
(b
a
§
S
o'
o
rFor users registered to KX-TG2000B:
LINE 3 and LINE 4 ringer pattern settings are inoperative.
For assistance, please call: 1 -800-211 -PANA{7262)
35