Panasonic KX TGA420B - Manual (Page 39)

Canceling Registration
If you no longer need to use the station unit or if you need to register the
unit to a different KX-TG4000B/KX-TG2000B base unit, it may be
necessary to cancel the registration with the base unit
Only one unit can be canceled at a time by using the base unit to which the
station unit IS currently registered
Make sure that the base unit and station unit are in the standby mode
Base unit
1 Press IFUNCTIONI
2 Press V or A until the arrow
points to
“Registration",
and
press ►
3 Press V or A until the arrow
points to
"Deregistration”,
and press ►
• The registered unit numbers are
displayed
Station unit
J Press I FUNCTION 1
2 Press V or A until the arrow
points to
“Registration”,
and
press ►
3 Press V or A until the arrow
points to
“Deregistration”,
and press ►
D e r e g i s t e r i n g
H S N o . B I 2 3 4 5 6 7 8
E N T E R = S e t
Deregister"^
Handset2
-<=No CLEAR^Yes
• To stop, press ◄
4 Press ► or ◄ to move the
4 Press! CLEAR 1
cursor to the extension number • A beep sounds and "Clear” is
to be canceled displayed
• To return to the standby mode,
5 Press ( ENTER 1 Dress 1 EXIT]
• [-] Will
be displayed
D e r e g i s t e r " ^
H a n d s e 1 2
^ = N o C L E A R = Y e s
'To stop, press <
The canceling procedure must be
carried out with both the base unit
and the station unit
5 Press ICLE^I
• A beep sounds and “clear” is
displayed
• To return to the standby mode,
press dM)
'The station unit will not work To use it
again, registration will be required
(P 12, 13)
For assistance, please calf 1 -800-211 -PANA(7262) 39