To erase the recorded greeting message – Panasonic KX TGA420B User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
. Press
[VOICE
!
while the station unit is in the standby mode, and lift
the handset off the cradle.
• If the direct access mode is OFF (p. 41), enter the mailbox password and press
d).
• If you have new messages, listen to all of them.
2. Press (^, then press (T).
3. After the tone, talk clearly using the handset. To end, press (T).
4. Press d).
5. Replace the handset on the cradle.
• Announcements and the message will be heard through the handset instead of
the speakerphone.
• You can adjust the handset volume by pressing A or V .
To erase the recorded greeting message
1. While the station unit is in the standby mode, press IVOICE
I.
• If the direct access mode is OFF (p. 41), enter the mailbox password and press
(D.
• If you have new messages, listen to all of them.
2. Press d].
3. Press (D again while the message is being played.
4. Press fvoiCE MAI
l
].
• The unit will answer with the pre-recorded greeting message (p. 44)._________________
• In step 1, you can lift the handset off the cradle after pressing [VOICE MAIL).
To record a personal greeting message using the handset
CO
For assistance, please call: 1-800-211-PANA(7262)
45