Panasonic KX TGA420B - Manual (Page 56)

Pager Call
This feature allows the station unit to alert your pager when your mailbox
has received an incoming message from an outside caller (When a
message has been transferred or delivered from another user, the unit will
not alert your pager) You can retrieve the message from a touch tone
telephone {p 53) If you subscribe to a Caller ID service, the caller’s
telephone number will be displayed on your pager
First store a pager number and the pager display number (p 56, 57), then
set the unit to call the pager
Make sure that the station unit is in the standby mode.
storing a Pager Number
7 Press I FUNCTION I
2 Press V or /\ until the arrow
points to
“Pager setting”,
and press ►
3 While
“Pager number”
is at the
arrow, press ►
Enter pager No
• If the number has already been
stored.
It
will be displayed
Enter your pager number, and
press IPAUSEI twice * * Enter the
access code, if required by your
pager company
OR
If you use a 1-800 pager
number with a pager PIN
code
Enter the 1-800 number, and
press
[PAUSEI
3 times *
Enter the pager PIN code
• If you misdial, press I CLEAR I
Digits are erased from the right To
erase all the digits, press and hold
I CLEAR 1
• You can enter a total of 44 digits
5 Press I ENTER I
• A beep sounds
• To return to the standby mode,
press lE)^
‘Pager companies require a delay
after the pager number and/or the
access code is dialed
For a 1-800 pager number, a delay
will be required after the pager
number and the pager PIN code are
dialed
Contact your pager company
regarding the required pause time
Pressing
I
PAUSE) once creates a
3 5 second delay and counts as one
digit
• If the line(s) has(have) rotary or pulse
service, press Q between the pager
number and I PAUSE I in step 4
• If you stored a 1 -800 pager number,
alphanumeric voice dispatch pager
services will not work with this
function
56