Panasonic KX TGA420B - Manual (Page 16)

Programmable Settings
Selecting the Ringer Voiume
You can set the nnger volume to HIGH, LOW or OFF
Your phone comes from the factory set to HIGH
Make sure that the station unit is in the standby mode
J Press I FUNCTION I
2 Press V or A until the arrow points to
“Ringer setting”
3 Press ►
While
“Ringer volume”
is at the arrow,
press ►
• The current volume is displayed
Save directory
►Ringer setting
Line selection
►Ringer volume
Ringer pattern
Incoming call
HIGH
LOW
OFF
Ringer volume
Low
I B E f l H H B High
V A
A 1
1 V
Ringer volume
Low f l B High
V A
A f
1 V
Ringer off
V A
5 Press A to increase or press v to
decrease the volume
• Each time you press v or A, the volume
will change and ring
• It IS norma! that 7 bars change to 2 bars when
the ringer volume is set from HIGH to LOW
• To turn the ringer OFF, press and hold v
until a beep sounds “Ringer off” will be
displayed and the station unit will not ring for
all the lines
-To turn off the ringer for one of the lines, you can do so by setting Ring group
feature at Ringer setting on the base unit (See page 23 in the
KX-TG4000B/KX-TG2000B Operating Instructions) When “Ringer off is set
for an individual line by the ring group feature on the base unit, “Ringer
o f f ” will not be displayed on the station unit The line status icon (p 7) will
flash on the station unit when a call is coming
• To return to the standby mode, press [EXIT]
To turn the ringer ON, press a in step 5
• The ringer will sound at the LOW level
> You can also select the ringer volume while a call is being received Press v
A while the unit is ringing
>To change the ringer pattern, see page 35
or
16