Panasonic KX TGA420B - Manual (Page 18)

Making Calls
• If the unit detects a problem, an error message will be displayed (p. 64).
• For users registered to KX-TG4000B:
If 4 other units are in use, you may not be able to make a call. When you try to
make a call, “System is busy. Please try again later will be
displayed.
« For users registered to KX-TG2000B:
—If more than one unit is in use, you may not be able to make a call. When you
try to make a call, “System is busy. Please try again later will be
displayed;
—If (LINE 3l or ( line 4| is pressed, “Line not available” will be displayed.
To dial after confirming the entered number
I Enter a phone number.
• If you misdial, press [CLEARl. Digits are erased
from the right. __________
• To cancel, press (EXIT].
2 Lift the handset off the cradle or press
(DIGITAL SP-PHONE1.
• You can press a line button instead of pressing
(DIGITAL SP-PHONII.
• After a few seconds, the display will show the
length of the call.
3 When the other party answers, talk into the
handset or MIC.
4 To hang up, replace the handset on the cradle
or press (DIGITAL SP-PHONEl.
1 1 1 2 2 2 2 D
fnE,
Ex. Line 1 is selected.
jsis;
Talk Linei
1 1 1 2 2 2 2
Talk Linei
00-00-00
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
• Talk alternately with the caller in a quiet room,
• If the other party has difficulty hearing you, press v to decrease the speaker
volume.
• If the other party’s voice from the speaker cuts in/out during a conversation,
press V to decrease the speaker volume.
• You can switch to the handset by lifting it up off the cradle. To switch back to
the speakerphone, press I DIGITAL SP-PHON^.
18