Panasonic KX TGA420B - Manual (Page 58)

Pager Call
To erase the pager number
Press I FUNCTION, and press v
or A until the arrow points to
“Pager setting”,
and press
►
While
“Pager number”
is at the
arrow, press ►
Press I CLEAR 1
Press I ENTER I
►The pager call mode will automatically
return to OFF (see below)
To erase the pager display
number
1 Press I FUNCTION), and press v
or A until the arrow points to
“Pager setting”,
and press
Press V or A until the arrow
points to
“Pager display
and press >
Press ICLEAR]
Press fENTER)
Setting the Unit to Call a Pager
J Press (FUNCTION)
2 Press V or A until the arrow
points to
“Pager setting”,
and press ►
3 Press V or A until the arrow
points to
“Pager on/of f”,
and
press ►
• “Of f" (factory preset) is displayed
4 Select
“On” by
pressing v or
A
Pager on/off
V A
On^
VA ENTEii'^saVe
5 Press [ENTERI
• A beep sounds
• To return to the standby mode,
press iE^
To turn off the pager call mode,
select “Off” in step 4
if you have not subscribed to a Caller
ID service, the caller’s telephone
number will not be displayed on your
j^pager
• If another message is received before
the unit alerts your pager for a
previous message, the previous caller
information will not be sent to your
pager Only the last call received will
be sent to your pager
• If someone else makes or answers
another call with your unit before the
unit alerts your pager for a previous
message, the unit will stop alerting
your pager for that message
• If you receive a telephone number on
your pager but cannot recognize the
caller, you may have received a direct
inward dial (DID) call, such as from a
PBX Please call your unit to check
the caller’s message
58