Using the broadcast key, To cancel the broadcast setting, Broadcast report – Panasonic Compact Plain Paper FAX KX-FP270 User Manual
Page 67: Sending faxes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sending Faxes
Using the BROADCAST key
The documents will be scanned and stored into memory when using the BROADCAST key. After transmission,
the stored documents will be erased automatically.
The memory capacity is approx. 25 pages based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 128.
1
2
Insert the document FACE DOWN.
Press [BROADCAST].
• The documents will be fed into the unit and
scanned into memory. Then the unit will transmit
the data to each station, calling each number
sequentially.
Note:
• If you select the fine, super fine or half tone resolution,
the number of pages that the unit can transmit will
decrease.
• If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 5 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press [
stop
] while the unit displays
“BROADCASTING”.
u
O
o
■D
Display:
2. Press [START/COPY/SET],
SEND CANCELED?
t
YES: PRESS SET
Broadcast report
After all of the transmissions have been completed, the unit will automatically print the following report.
Total number of
pages sent to
the fax server.
The mark in this column
shows the fax has been sent
to the fax server.
67