Panasonic Compact Plain Paper FAX KX-FP270 - Manual (Page 59)

Sending a fax using the Internet
Sending Faxes
1
2
3
4
5
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document (up to 15 pages) FACE
DOWN until a single beep is heard and the unit
grabs the document.
Display: STANDARD
If necessary, press [RESOLUTiON) repeatedly to
select the desired setting (see the bottom of
page 54).
Press [iQ-FAXl.
IQFAX TO WHERE?
Enter the fax number using the dial keypad,
One-Touch Dial or [JOG DIAL).
• You can use the [BROADCAST] key (see pages
66 and 67).
FAX^
Press fSTART/COPY/SET).
TRYING IQ-FAX
I
CONNECTING,
I
SENDING PI
I
SENT TO SERVER
• If the number you dialed is out of the FaxSav
network sen/ice area, the unit will show the
following messages and send the fax directly
over the telephone line.
OUT OF NETWORK
\
SENDING NORMAL
• If “OUT OF NETWORK" is displayed when
sending a fax long distance or internationally
using IQ-FAX, then contact FaxSav at
1 -888-332-9728.
Document guides
Document
feeder tray
Dial keypad
[START/COPY/SET]
[IQ-FAX]
[JOG d T al ]
[ RESOLUTION ]
One-Touch
Dial keys
[BROADCAST
D1
O
"D
'<
If you cannot send a fax
Contact FaxSav at 1-888-332-9728.
The FaxSav customer service center may send
you a program update. While receiving this
update, you will not be able to operate the unit
and the following message will be displayed for
about 3 minutes. During this time, you also will
not be able to operate extension telephones, if
they are connected.
Display: LOADING IQ-DATA
If a loading error occurs, the unit will display the
following message.
LOADING ERROR
In this case, contact FaxSav at 1-888-332-9728.
59