Panasonic Compact Plain Paper FAX KX-FP270 - Manual (Page 108)

iessag@i
Reports
When your fax does not transmit, check the following items first.
- The number you dialed is correct.
- The other party’s machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the sending and journal
reports (see pages 62 and 63).
Communication message Error code Cause & Remedy
COMMUNICATION ERROR
41-72
FF
o A transmission or reception error occurred. Try again or check
with the other party.
DOCUMENT JAMMED — 0 The document is jammed. Remove the jammed document (p. 117),
ERROR-NOT YOUR UNIT 54, 59
70
0 A transmission or reception error occurred because of a problem
with the other party’s fax machine. Check with the other party.
MEMORY FULL — 0 The document was not received due to memory being full.
NO DOCUMENT — o The document was not fed into the unit properly. Reinsert the
document and try again.
OTHER FAX NOT RESPOND o The other party’s fax machine was busy or ran out of recording
paper. Try again.
o The document was not fed properly. Reinsert the document and
try again.
o The other party’s fax machine rings too many times. To send a fax
manually, dial the number, confirm the fax tone, and press
[START/COPY/SEf).
o The other party’s machine is not a facsimile. Check with the other
party.
G The number you dialed is not in service.
PRESSED THE STOP KEY — o The (STOP) button was pressed and fax communication was
canceled.
THE COVER WAS OPENED — o The cover was opened. Close it and try again.
OK — o Fax communication was successful.
108
For assistance, call 1-800-435-7329.