Panasonic Compact Plain Paper FAX KX-FP270 - Manual (Page 113)

Operations
Copying
i
I Problem Cause & Remedy
j
When you try to make a copy, the
unit beeps and the display shows
“CHECK PAPER”.
• Pull the recording paper set lever forward, make sure the paper is
inserted correctly and push the recording paper set lever back.
The unit does not make a copy. • You cannot make a copy during programming. Try to make a copy
after programming or stop the programming.
A dirty pattern or a black line
appears on the copied documents. • The glass or rollers are dirty. Clean them (p. 120).
The copied image is distorted. • The thermal head is dirty. Clean it {p. 120).
The document is not copied
properly.
• The film Is not inserted correctly. Insert it correctly (p. 118, 119).
The copied document is blank. • The film is not inserted correctly. Insert it correctly (p. 118,119).
The printing quality is poor. • Some paper has instructions recommending which side to print on.
Try turning the paper over. We recommend smooth paper such as
Hammermill® Jet Print for clearer printing.
The printing is faint.
Original
• You may have used paper with a cotton and/or fiber content that is
over 20%, such as letterhead or resume paper. We recommend
smooth paper such as Hammermill® Jet Print for clearer printing.
A B C
Copy
A B C
A paper jam occurs during copying. • The film is not inserted correctly. Insert it correctly (p. 118, 119).
X
T3
Answering device
Probtem
j
Cause & Remedy |
No voice messages have been
recorded in the TAD/FAX mode. • The memory is full. Erase some or all the messages (p. 94, 100).
1 cannot retrieve recorded messages
from a remote teiephone.
• Make sure that you use the remote operation ID correctly (p. 98).
For assistance, call 1-800-435-7329.
113