Panasonic Compact Plain Paper FAX KX-FP270 - Manual (Page 65)

Sending Faxes
From memory
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 128.
Press [MENU).
Display:
Press @, then [Tj [^.
1.SYSTEM SET UP
Setting memory transmission
1
2
3
4
SEND BY MEMORY
Press [START/COPY/SET].
MODE=OFF ▼ A
Press [▼] or ® to select “ON”.
MODE=ON ▼ A
5
6
• If this feature is not required, select “OFF”.
Press (START/COPY/SET].
SETUP ITEM [ ]
Press [MENU].
Transmitting documents from memory
Insert the document FACE DOWN. 1
2 Enter the fax number using the dial keypad,
One-Touch Dial or (JQG DIAL). Dial keypad
When using the dial keypad or (JOG DIAL], press
iST^T/COPY/SET].
• The document will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the documents.
• The amount of memory used will be shown as a
percentage on the display.
Display:
o
*a
•<
I____
i START/COPY/SET)
One-Touch
Dial keys
PAGES^Ol 05
Amount of memory used
(JOG DIAL]
Note:
• The stored documents will be automatically erased after transmission.
• To cancel the memory transmission, press (STOP] during or after scanning the document.
• If you select the fine, super fine or half tone resolution, the number of documents that can be sent will decrease.
• If the stored pages exceed the memory capacity, the transmission will be canceled.
65