Note, Adding paper to the paper tray, Setup – Panasonic Compact Plain Paper FAX KX-FP270 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setup
Fan the stack of paper to prevent a paper jam
and insert the paper into the paper tray.
• The height of the stack of the paper should not
exceed the upper limit on the paper tray,
otherwise the paper may jam or multi-feed.
• The paper should not be over the tab.
• If the paper is not inserted correctly, readjust
the paper or the paper may jam.
® _
■o 3
a
^ ST.
Q> a
■-» —
Ô
3
Move the recording paper set lever back.
Note:
• Avoid paper with a cotton and/or fiber content that is over 20%, such as ietterhead paper or those
used for resumes.
• Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause
a paper jam.
• Avoid extremeiy smooth or shiny paper that is highiy textured. Aiso avoid paper that is coated,
damaged or wrinkied.
• Avoid double-sided printing.
• Do not use paper printed from this unit for double-sided printing with other copiers or printers, or a paper jam
may occur.
Adding paper to the paper tray
1. Pull the recording paper set lever forward.
• The unit will beep and the following message will
be displayed.
Display:
check
lever
2. Remove the installed paper.
3. Add paper to the removed paper and straighten it.
4. Fan the stack of paper and insert it into the paper
tray.
5. Move the recording paper set lever back.