Press (directory program), For stations 1-5, Helpful hints – Panasonic Compact Plain Paper FAX KX-FP270 User Manual
Page 38: To keep the telephone number secret, To edit a stored station name and number, One-touch dial
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

One-Touch Dial
Storing names and telephone numbers in the
One-Touch Dial
The unit’s memory allows you to use the One-Touch Dial for rapid access to your most frequently dialed
numbers. 10 stations are available.
9
The One-Touch Dial key 1 can be used as One-Touch Dial key 1 (DIAL MODE) or as a broadcast key
(BROADCAST). Both functions cannot be used at the same time. For the broadcast function, see pages 66 and 67.
1
4
5
Press (DIRECTORY PROGRAM).
Display:
PRESS STATION
OR USE JOG-DIAL
For stations 1-5
Press one of the One-Touch Dial keys.
® If you select One-Touch Dial key 1, select
“DIAL MODE” by pressing (v]- Then press
[START/COPY/SET ] to go to the next prompt.
For stations 6-10
Press (LOWER), then press one of the One-Touch
Dial keys.
Enter the station name, up to 10 characters, by
following the instructions on the next page.
Example:
NAME=john
Press (START/COPY/SET).
Example:
Enter the telephone number up to 30 digits.
• To enter a hyphen in a telephone number, press
(
hyphen
) (One-Touch Dial key 1).
Example:
Press (START/COPY/SET).
REGISTERED
o To program other stations, repeat steps 2 to 6.
Press (DIRECTORY PROGRAM) to exit the
program.
Helpful hints:
« To confirm the stored telephone numbers
and station names, print a telephone number
list (see page 121).
o The stored names in the One-Touch Dial can
be searched for using the JOG DIAL directory.
Example:
John
To keep the telephone number
secret
Press (SECRET) (One-Touch Dial key 3) after
entering the telephone number in step 5.
© Once a secret number is set, it cannot be
viewed.
o The telephone number will not appear on the
telephone number list,
o Pressing (SECRET) does not count as a
digit.
To edit a stored station name
and number
Enter the desired name in step 3.
Enter the desired number in step 5.
To erase a stored station name and number,
see page 43.
38