Programming the network passcode, Note, Programming the network passcode -6 – Panasonic KX-F280C User Manual
Page 84: C3e3ed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the network passcode
To activate this feature, the identical network passcode must be preprogrammed both on your
unit and the other Panasonic compatible machine(s).
The network passcode may be any 4-digit number except “0000”.
3
4
C3E3ED
^OHI 4j 5] I Ml*0 s]
[■^ 7] [
tuv
s] [*«'> 9 ]
Press the
MENU
button until the following is shown.
PROGRAM[1.DATE
2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 12.
NETWORK
PASSCODE
=0000
Enter the desired 4-digit passcode (choose from
0001-9999).
Press the
SET
button to store the program in memory.
PROGRAM[1.DATE
2.TËL
3.SYSTEM 4.REPORT]
Press the
MENU
button to end the operation.
The display shows the current time.
NOTE:
•The network passcode is preset to "0000”, which does not activate the network communication
feature.
• If you make a mistake in step 3, use the cursor key (◄ or ►) to move the cursor to the incorrect
number, then make the correction.
5-6