Panasonic KX-F280C - Manual (Page 45)

HELP Function
—If you have lost your procedures—
The HELP button is used to print information about how to send documents, how to set up your
unit and how to store phone numbers.
Using the HELP button
Press the HELP button when the unit is in the idle status.
The following is printed out.
«SENDING fi FRX>>
1. INSERT DOCUMENT FACE DOUN.
2. PRESS "SP-PHONE".(LIGHTS)
3. DIAL FAX NUMBER OF PARTY YOU UISH TO SEND TO.
4. UAIT FOR FAX TONE THEN PRESS "START". CSP-PHONE LIGHT GOES OFF)
((SETTING UP YOUR UNIT>>
1. PRESS "MENU" TUO TIMES.
2. PRESS "tt" THEN THE NUMBER OF THE FEATURE YOU UISH TO SET USING
THE DIAL KEY-PAD. (SEE BASIC FEATURE LIST BELOU)
3. ENTER CHOICE OR DATA.
4.IF YOU ENTERED »99 PRESS "START", OTHERUISE PRESS "SET" TO STORE
YOUR SELECTION.
5. PRESS "MENU" TO END SET UP.
(BASIC FEATURE LI5T>
»01 SET DATE = Jan. 01 1994 12:00AM
»02 YOUR LOGO CI.E. COMPANY OR INDIUIDUAL NAME)
»03 YOUR TELEPHONE NUMBER
»04 PRINT TRANSMISSION REPORT = ERROR
»05 ANS/FAX RING COUNT
= 1
806 FAX RING COUNT = 1
»07 RECORDING TIME FOR ANS = UOX
»08 REMOTE ANS ID =111
HOP ^ CpflTI IRE LIST
[l=ERROR 2=ON 3=0FF]
II... 4 0=TOLL SAUER >c=RINGER OFF!
tl. . .4]
I1=U0X 2=1MIN]
1.INSERT DOCUMENT FACE DOUN.
2. PRESS ANY DIRECT CALL STATIOtl OR PRE^
CTO MAKE A PHONE CALL)
1. LIFT HANDSET OR PRESS "SP-PHONE".
2. PRESS ANY DIRECT CALL STATION OR PRESS "AUTO" AND 2-DIGIT NUMBER.(00 TO 99)
((HOU TO RECORD A GREETING MESSAGE)>
l.OPEN "ANSUERING CONTROL" PANEL.
2.PRESS "REC".
3.SPEAK INTO THE MICROPHONE.(UP TO 16 SEC)
4.UHEN FINISHED, PRESS "STOP" OR "REC" AGAIN.
((PRIOR TO LEAUING>>
CONFIRM THAT THE ANS/FAX INDICATOR IS LIT.
((HOU TO PLAYBACK ONLY NEU MESSAGES))
PRESS "NEU MESSAGES".
((HOU TO PLAYBACK ALL THE RECORDED MESSAGES))
PRESS "ALL MESSAGES".
((SETTING THE OUERSEAS TRANSMISSION MODE))
1. PRESS "OUERSEAS".
2. TRANSMISSION SPEED IS SET TO 4800 BPS.
2-17