Network communication, Tx passcode check, Rx passcode check – Panasonic KX-F280C User Manual
Page 82: Notes, Using a passcode, Network communication -4, Using a passcode -4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Network Communication
The network communication feature with network passcode eliminates fax transmission to
unauthorized parties, and helps to prevent reception from an unauthorized station.
This feature is effective to prevent “Junk mail” faxes since only those units with the same
passcode can transmit to your unit.
When the network communication feature is used, the identical network passcode of 4 digits must
be programmed on both sides of the line. The unit checks the passcode before transmitting or
receiving a document.
The unit provides two types of passcode check modes. They are TX (transmission) passcode
check mode and RX (reception) passcode check mode.
■ TX Passcode Check:
Use this feature to restrict document transmission. If the passcode sent from the other
Panasonic compatible machines does not match with the one programmed in your unit,
transmission does not take place (see page 5-7 for TX passcode check setting).
■ RX Passcode Check:
Use this feature to restrict document reception. If the passcode sent from the other Panasonic
compatible machines does not match with the one programmed in your unit, reception does not
take place (see page 5-8 for RX passcode check setting).
NOTES:
•These features are effective only between Panasonic compatible machines that have the same
passcode.
Using a passcode
Before communication begins, check that your passcode and the other station’s passcode are
identical.
■ When you want to transmit a document to a designated station oniy:
Set TX PASSCODE CHECK to ON.
Function
Your unit
Other Panasonic
compatible machine
TX PASSCODE CHECK
ON
ON/OFF
RX PASSCODE CHECK
OFF
ON/OFF
Your unit transmits a document only when the correct passcode has been received.
5-4