Panasonic KX-F280C - Manual (Page 53)

Automatic reception
Set the RECEIVE MODE to any of the following modes:
—ANS/FAX mode
^TEL/FAX mode
—FAX mode
When receiving a fax call, the unit will automatically switch to the fax mode, then initiate reception.
If you press the SP-PHONE button or lift the handset during receiving a document, the unit will
automatically call the other party. For further details, see “Voice Contact” on page 5-30.
Receiving in the ANS/FAX mode
1
RECEIVE MODE
I ANS/FAX
I TEL/FAX
I FAX
I TEL
Make sure that the unit is in the ANS/FAX mode.
A call comes in.
The unit answers the call after 1 to 4 rings or no rings,
depending on the number of rings after which the unit
is set to answer (see page 2-12).
-When receiving a fax tone, the unit automatically
activates the fax function to receive documents.
'When receiving a voice-call, the unit plays your
greeting message.
NOTES:
• Begin by transmitting the FAX CORRESPONDENCE leaflet found on page 8-11 to several of
your associates. In this way you can confirm that your unit is functioning correctly and inform
them of the procedure for transmitting documents and/or recording voice-message on your unit.
• If you set the RINGER OFF through the ANS/FAX Ring Count function, the extension phone
connected to the unit will ring once when receiving a call. See page 2-12 for the RINGER OFF
setting.
3-7