Panasonic KX-F280C - Manual (Page 44)

Setting the remote code (REMOTE ANS ID) for remote operation
The REMOTE ANS ID is used to access your answering device from a remote location with a
touch tone phone (see pages 5-23 to 5-28).
Using this code, you can retrieve incoming messages recorded on the microcassette tape from a
remote location.
The REMOTE ANS ID is preset to “111 If you wish to change the number, you can choose any
number from “111" to “999" except numbers including “0”.
Make sure that the first 2 digits of the REMOTE ANS ID number is different from the JUNK MAIL
PROHIBITOR ID number (see pages 5-9 and 5-10).
1
2
3
[ 1 ]
[*BC
2 ]
[otF
s j
[ chi 4 ] [ j K i 5 ] [ m n o S ]
[pHS 7] [^v 8 ] [«»9]
EÏ3 r~^
Press the MENU button until the following is shown.
PROGRAM[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 08.
ENTER YOUR REMOTE
ANS ID=111
Enter the desired REMOTE ANS ID using the dial
keypad.
Example: The REMOTE ANS ID is 456.
ENTER YOUR REMOTE
ANS ID=456
Press the SET button to store your selection in
memory.
PROGRAM[1.DATE 2.TEL
3.SYSTEM 4.REPORT]
Press the MENU button to end the operation.
The display shows the current time.
NOTES:
•We recommend that you do not use seven (7) as a code number, since this number is used as
the greeting message re-recording command for remote operations.
• If you make a mistake in step 3, use the cursor key (► or ◄) to move the cursor to the incorrect
number, then make the correction.
2-16