Panasonic KX-P3123 - Manual (Page 93)

Printing Area
Fanfold Paper
Paper Specifications
o
o
o
o
o
o
o
o
o
o
o
o
1-0
o
o
o
o
o
o
o
o
o
St character
Printing area
Paper perforations
Printing area
Push Pull
A r ( 2 5 A mm)
B 0.7" (17.8 mm)
C 0.6" (15.2 mm) 5.4" (137 mm)
D 1"(25.4 mm)
A: Value A indicates the area near the paper perforations where
the quality may not be optimum.
B: Value B indicates the minimum distance between the sprockets
and first printable character. (When the left tractor is set on the
left end and the margin is set to 0.)
C: Value C indicates the area from the top edge of the paper to the
top of the first printed character.
D: Value D indicates the position where paper out is detected and
printing may not be optimum.
Single Sheets and Envelopes
St character
Printing area
Single Sheets and Envelopes
B 1.5" (38 mm)
c
0.6" (15.2 mm)
D 1"(25.4 mm)
B: Value B indicates the minimum distance between the edge of
the paper and the first printable character. (When the left paper
guide is set to the left end and the margin is set to 0.)
C: Value C indicates the area from the top edge of the paper to
the top of the first printed character.
D: Value D indicates the position where paper out is detected and
printing may not be optimum. (When printing on envelopes, do
not print on area where edges overlap. Print quality may not be
optimum.)
93