Paper feed selection, Push tractor mode, Rear feeding) – Panasonic KX-P3123 User Manual

Page 20: Pull tractor mode '* [t| ” (bottom feeding), Friction mode “ q, Note

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Paper Feed Selection

This printer has two paper feed mechanisms to support 3 paper paths. One mechanism is TRACTOR

mode for continuously fed paper. In the tractor mode you can choose between PUSH or PULL.

The other paper feed mechanism is FRICTION mode. In the friction mode you can feed single sheets

or envelopes through the top. The optional KX-PT10 Cut Sheet Feeder will accommodate automatic

feeding of single sheets, from the top paper path.

Push Tractor Mode

t i

[« ’I

(Rear Feeding)

— fanfold paper (1 part)

— multipart forms consisting of 2 parts

Pull Tractor Mode '* [T| ” (Bottom Feeding)

— multipart forms consisting of 3 or 4

parts

— labels

— fanfold paper (1 part)

Friction Mode “ Q

— single sheets

(The KX-PT10 allows you to automatically

feed up to 80 sheets of 20 lb paper.)

— envelopes

Note:

• When feeding paper from the bottom, do not use reverse line feed. Paper may not feed

correctly and print quality may not be optimum.

• Paper Parking is not available when the paper is installed from the bottom.

• Multipart forms consisting of 2 parts may be used for rear feeding (Push mode). For 3 or

4 part forms, we recommend bottom feeding (Pull mode) for optimum print quality.