Setting the control table, Printing out the current settings in macros – Panasonic KX-P3123 User Manual

Page 43

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Control Table

While in the function mode, the black lettering (FONT, PITCH, FORM LENGTH, etc.) will help you

navigate through the Control Table. These settings will be temporary, unless stored in a MACRO.
Refer to page 48.

Printing Out the Current Settings in MACROS

Before changing any settings on the control table, you should verify the current settings.

Load a sheet of paper (fanfold or single sheet).

Press (FUNCTION I to enter the FUNCTION

mode.

The ON LINE/FUNCTION indicator will blink.

Press and release [TEAR OFF] (OTHERS)
until all the column indicators are blinking.

Press [ LOAD/PARK ) (SET) to print out the

current settings.

Press [ FUNCTION I (EXIT) to exit the
FUNCTION mode.