Panasonic KX-P3123 - Manual (Page 59)

Setting the Initial Setup Mode
Using the Control Panel
1 While pressing [ FUNCTION), turn the
power switch on.
The ON LINE/FUNCTION indicator will
blink, and all the row indicators will be lit.
RECALL-MACRO-SAVE
< MARGIN
0» UNE
FUNCTION
SUPER QUIET
POWER
A M IC R O LF T 1
OTHERS SET PITCH FORM LENGTH
Press and release [ SUPER QUIET)
until your desired row indicator
combination is lit. P. 57)
Note:
I • Row indicators will switch each time you
I
press[ SUPER QUIET).
Use (TEAR OFF) (C1), ( LOAD/PARK]
(C2), [ON LINE) (C3), (FF) (C4), and
[ LF] (C5) to change the settings of
the column indicators, P. 57)
Note:
• Each column indicator is simply
controlled by pressing one of the 5
switches.
u
(/)
£
c
TJ
o
a
(D
Press ( FUNCTION) (EXIT) to store
your selection(s) and exit the initial
setup mode.
59