Panasonic KX-P3123 - Manual (Page 44)

Setting the Control Table
Setting the FONT/PITCH/FORM LENGTH
1 Be sure the power is on.
3A FONT
3B PITCH
3C FORM LENGTH
Press [ FUNCTION I to enter the FUNCTION
mode.
The ON LINE/FUNCTION indicator will blink.
Press and release ( ON UNE I (FONT) to
reach the desired font. Go to step 4.
Press and release fFFl (PITCH) to reach
the desired pitch. Go to step 4.
Press and release [ LF ] (FORM LENGTH)
to reach the desired form length.
44